Vacuum any black / white particles that may accumulate around the unit. Vacuum and wipe down the belt with a damp cloth.Failure to do so may result in premature failure of key electrical components. Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated.Inspect all assembly bolts of the machine for proper tightness.Return the treadmill to its previous position.Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.Move the treadmill to a remote location.Fold the treadmill into the upright position, making sure that the lock latch is secured.If any labels are damaged or illegible, contact Customer Technical Support for replacements.Ĭlean underneath the treadmill following these steps:.Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned. Check the tension and alignment of the running belt.Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.If the power cord is damaged, stop using and contact Customer Technical Support. Never use solvents, as they can cause damage to the treadmill. Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.Ĭlean and inspect, following these steps: Improperly working equipment must be kept out of use until it is repaired. Defective components must be replaced immediately. Equipment needs to be inspected at regular intervals. Preventative maintenance is the key to smoothly operating equipment, as well as keeping the user’s liability to a minimum. Incline Motor Replacement.Ĭonsole Replacement. Running Deck Replacement.įront Roller Replacement. ĥ.3.7 Troubleshooting - Heart Rate Function Issues. Troubleshooting - Noise Issues.ĥ.3.6 Troubleshooting - Speaker / Audio Issues. ĥ.3.3 Troubleshooting - No Response For Machine(Console & Motor). ĥ.3.1 Troubleshooting - No Power To The Console.ĥ.3.2 Troubleshooting - No Function For Safety Key. Įngineering Mode Overview.Įlectrical Diagram.
0 kommentar(er)
